Differential membrane 0.4 mm
£11,512.00 excl. VAT
For MHz ultrasound pressure measurements where wide bandwidth and smooth frequency response is required, this hydrophone is recommended.
Please note the total price of this product includes a differential power supply unit.
Additional information
| Lead time | 10 weeks |
|---|
More detail
This hydrophone must be used in deionised water. It is supplied with its own power supply and has a 50 Ω output.
Technical specifications
| Output impedance: | 50 Ω |
| Sensor material: | Single layer of 16 micron thick gold PVdF film |
| Mounting ring dimensions: | 100 mm diameter 10 mm thick |
| Membrane diameter: | 80 mm |
| Cable: | 1.5 m long, 5 mm diameter, bespoke multi-core cable and connector which connects to the dedicated power supply |
| Active sensor diameter: | 0.4 mm |
| Typical sensitivity: | 340 mV/MPa averaged in the range 2 MHz to 20 MHz |
| Sensitivity tolerance: | Sensitivity variation between individual membranes is approximately ±3 dB |
| Typical frequency response: | Flat (±2 dB): over the range 1 to 30 MHz A ‘flattening’ amplifier is not required as this hydrophone satisfies IEC standards |
* Precision Acoustics reserves the right to change the specification without notice.
Warranty: membranes 12 months against defective product but not damage caused by user. If a warranty claim is made on devices that have been calibrated at NPL, London, a charge will be made for the used part of the calibration (e.g. in the event of failure of a membrane at three months the charge for recalibration at NPL is 25% of the calibration charge).
