Submersible Preamplifier
£1,464.00 excl. VAT
The submersible preamplifier is an essential part of the hydrophone signal as it buffers the signal and provides a 50 Ω source. It connects either directly to an interchangeable probe (‘HP’ series), or, if required, via a 20 dB in-line attenuator (A20/1).
Additional information
| Cable length | 10m, 2m |
|---|
More detail
£1,464.00 excl. VAT
The submersible preamplifier is an essential part of the hydrophone signal as it buffers the signal and provides a 50 Ω source. It connects either directly to an interchangeable probe (‘HP’ series), or, if required, via a 20 dB in-line attenuator (A20/1).
Description
Power is provided by the DC coupler (DCPS) so that the DC power and the acoustic signal share the same conductors in the interconnecting coaxial cable between the preamplifier and the coupler.
Technical specification
| Output impedance: | 50 Ω |
| Voltage gain: | Nominal 8 dB at 3.5 MHz Bandwidth: 10 kHz 50 MHz (-3dB) 5 kHz to 100 MHz (-6 dB) |
| Maximum output level: | 700 mV pk - pk into 50 Ω load |
| Output noise: | Typically 60 µV rms (100 MHz bandwidth) VSWR: 1-1.4 over the range 0.3 MHz - 130 MHz |
| Terminations: | Input - MCX Output - SMC |
| Power requirements: | 24 V from the DCPS |
| Operating range: | Temperature 0 °C to 50 °C |
| Weight: | 50 g |
Data sheet
Submersible preamplifier data sheetAdditional information
| Cable length | 10m, 2m |
|---|
